Expert Answers about Chevrolet ATV-UTV Tie Downs
- Do All 4 UTV Wheels Need to be Strapped Down with Erickson ATV E-Track Tie-Down Kit # EM09160
- I checked with Erickson and even their pictures show just two of the wheels being secured using the ATV E-Track Tie-Down Kit # EM09160. Basically you want to use all 4 of the chocks meaning you would secure 2 wheels. The rear wheels are recommended.
If 1 set does not have the capacity for your UTV then you would need to use an additional set or additional tie downs (see link) to cover the whole weight of the UTV. A set has a safe working load limit of 1,500 pounds and a break strength...
view full answer... - Can More Than One Set of Erickson ATV E-Track Tie-Down Kit # EM09160 Be Used for a UTV
- There is definitely no issue in using 2 sets of the Erickson ATV E-Track Tie-Down Kit # EM09160, one for the back and one for the front, to stabilize your UTV. If you look through the photos that other customers have sent in you can see that some people used one set while others used two. It really is just a matter of preference.
view full answer... - Is Weight Capacity of Erickson ATV E-Track Tie-Down Kit # EM09160 Individually or as Pair
- The 1,500 pound working load limit (WLL) for the Erickson ATV E-Track Tie-Down Kit # EM09160 referenced in your question does refer to the combined capacity of both straps and chocks. Since your UTV weighs close to 2,000 pounds I recommend using two sets to secure all four of its wheels to the trailer.
view full answer... - Can I Drive on the Horizontal E-Tracks with an ATV/UTV
- Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long # e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without issue. You can use the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314 as your wheel straps if you don't already have some.
I've linked some review videos of these parts for you to have a look at.
view full answer... - Is The Capacity of the Erickson ATV E-Track Tie-Down Kit Per Tire
- The Erickson ATV E-Track Tie-Down Kit part # EM09160 has a 1,500 lb weight capacity as a whole. It's not made for vehicles if that's what you were wondering but rather ATVs and UTVs. If you need to secure a vehicle I instead recommend using the Erickson Adjustable Wheel Net part # 77314 which has a capacity of 1,166 lbs per wheel net and attaches to the same e-track system as the above.
view full answer... - Straps For Securing an ATV/UTV to Trailer for Towing
- The Erickson Re-Tractable Ratchet Straps # 34414 are capable of being mounted permanently. These are great straps and the push button retract is a great feature. Unfortunately I do not recommend permanently mounting any material straps as they do deteriorate from UV damage and weather.
For your situation I recommend the Pack'em Wheel Tie-Down Kit # PK-WTD. This anchors your UTV at the wheels allowing your suspension to move and not risking damage to the suspension components by overloading...
view full answer... - E Track Tie Down Kit Recommendation for Razor UTV
- If your trailer has Etrack installed in it like the part # E19148 the Erickson ATV E-Track Tie-Down Kit # EM09160 that you referenced would be a great option.
This kit has a safe working load limit of 1,500 lbs with a max break strength of 4,500 lbs so it would have more than enough capacity.
view full answer... - Can Erickson Mini E-Track Plate be Used as Tie-Down for UTV or ATV
- Yes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks.
I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks - for...
view full answer... - ATV/UTV Wheel Tie Downs That Are Made In The USA
- While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made in the USA.
For straps we have the Snap-Loc E-Track Tie-Down Strap # SLLS28RER. These 2" wide by 8' long straps have a safe working load of 1,467lbs each.
You can attach the straps to the Stainless Steel Snap-Loc E-Track Tie-Down Anchor # SLSS which is also Made in the USA and the stainless steel construction will outlast other anchors...
view full answer... - Tie Down Kit Recommendation for Kawasaki Tyrex 4 LE on Utility Trailer
- If you used the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160 on all 4 wheels of your UTV you'd have more than enough capacity for your 1,700 lb Kawasaki Tyrex 4 LE.
I attached an install video for this for you to check out as well.
view full answer... - Will Erickson ATV E-Track Tie-Downs EM98CV Be Able To Secure 2006 Kawasaki Mule 3010?
- Yes, the Erickson ATV E-Track Tie-Downs # EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010 weighs in right around 1500lbs this would be a perfect option for you.
I do recommend adding two sets of the Backing Plates # e66RR to better distribute the clamping force of the bolts holding the e-tracks to the trailer.
I included videos of the products...
view full answer... - Wheel Straps For ATV/UTV Compatible With 30" Tires And E-Track Rails
- We have just what you need.
For a wheel net that is compatible with the 30"x10"x15" tires on your new 2022 Polaris General XP 4 you will need the ProGrip Adjustable Wheel Net # 317-18900, and then to connect them to your e track rails you will need the E-Track Rope Ring Tie Down Strap # 33701080. You will need one net and two tie downs per wheel.
I included videos of the products mentioned for you to take a look at.
view full answer... - Backing Plates For The Erickson ATV E-Track Tie-Down Kit
- Erickson has the spacing for the mounting holes of the # EM09160 before and after the chock at approximately 4-3/8" center to center. Since they unfortunately do not offer a custom backing plate the # e96RR you purchased is going to be the closest option. The elongated front and rear holes are 4-1/2" apart center to center so you could possibly get it to line up straight and fit but you'll likely need to notch either the front or back hole about 1/8" to get the bolts to drop through.
view full answer... - What Is The Minimum Length Of The ShockStrap Ratchet UTV Tie-Downs 297-7RSBB-UTV?
- The minimum length of the ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4 # 297-7RSBB-UTV you were looking at is 29".
I included a video of the # 297-7RSBB-UTV for you to take a look at.
view full answer... - Is There a Difference Between ShockStrap Ratchet Motorcycle and UTV Tie-Downs
- The only difference between the ShockStrap Ratchet UTV Tie-Downs with Shock Absorbers # 297-7RSBB-UTV and ShockStrap Ratchet Motorcycle Tie-Downs with Shock Absorbers # 297-7RSBB-M is the title, so people searching for either UTV or Motorcycle tie-downs can find them easier.
So these are the same set of four 1-1/2" wide x 7' long straps with rubber-coated S-hooks with a 1,000 lbs working load limit (per strap). I have added a link to a video review for you to check out as well of the ShockStrap...
view full answer... - Tie-Downs to Secure UTV to Aluminum Trailer
- Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like # RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the trailer. This tie-down has a 5,000 pound capacity so that won't be an issue for your UTV.
To avoid any oxidation or reaction between the aluminum and steel you should use some sort of gasket material. Pretty much anything that can be cut to...
view full answer... - Are The ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers Made In The USA
- I double checked with my contact at the manufacturer and I was told that the ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers # 297-7RSBB-UTV are assembled here in the USA using parts sourced from Taiwan, China and the USA.
view full answer... - Could Kubota BX25D be Secured by ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers # 297-7RSBB-UTV
- I looked up the weight of your Kubota BX25D and found it to be 1,587 lbs. Since each one of the ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers # 297-7RSBB-UTV has a 1,000 lb capacity it would easily secure your Kubota!
view full answer... - Recommended ShockStrap Ratchet UTV Tie-Downs for Polaris RZR
- The ShockStrap Ratchet UTV Tie-Downs part # 297-7RSBB-UTV are what I recommend to secure a Polaris RZR as the 1,000 lb weight capacity per strap will be more than enough for the weight of the RZR. These are an excellent option that have built-in shock absorbers to help keep the item securely in place with constant tension.
view full answer... - Can I Carry An ATV Or Snowmobile On My Vehicle With Mad-Ramps Pivoting Ramp System
- I can definitely help determine if a Mad Ramp system is right for you, but I will need some information from you first. What type of ATV or snowmobile do you intend to transport? What vehicle will you be using to transport this item? Once I have this information, I will better able to help you.
view full answer...
Go To Results